Head & Arms

4.5” Grip Head (Lollipop)

  • A 4.5" Grip Head or commonly known as a Lollipop is equipped with an oversized T-handle, a 1-1/8" (Junior/2K) pin, and a 1-1/8" receiver. It features two 3/8" and two 5/8" holes for gobo arms, flags, or butterfly frames. This is used on a 2K Stand such as a Mombo Combo, Triple Riser Combo Stand.

  • Day Rate: $10

    Week Rate: $30

2.5” Grip Head

  • The strongest and most popular 2-1/2" grip head in the industry. The grip plates now feature two holes -- 3/8 and 5/8" diameter that eliminate confusion.

    Tip: Always have the T-handle on the right side when mounting to ensure safety and that the fixture will not fall due to the head tightening.

  • Day rate: $5

    Week rate: $15

Grip Arm 40”

  • Grip arms are used for multiple uses. They are mainly used on a C-stand to boom out fixtures, fabrics, etc. The length of the arm is 40 inches.

  • Day rate: $5

    Week rate: $15

Grip Arm 20”

  • Grip arms are used for multiple uses. They are mainly used on a C-stand to boom out fixtures, fabrics, etc. The length of the arm is 20 inches.

  • Day rate: $5

    Week rate: $5

Manfrotto Magic Arm

  • The Manfrotto 244N Variable Friction Magic Arm differs from the regular Magic Arm, in that the Variable Friction Arm allows partial locking in place of a light, grip, or a camera. This comes in handy when using a light or camera to track a subject. It is a pivot arm with a large locking knob. One end will support a light that has a baby (5/8") receptor with a 3/8” receiver. The other end is designed to fit into a Super Clamp socket, or other 5/8" receptor with a 1/4” receiver.

  • Day rate: $15

    Week rate: $45

Matthews Matthpoles (Various Sizes)

  • The black, spring-loaded Matthpole from Matthews offers a unique "expanding casting" that provides pressure for holding the Matthpole in place between door jambs or in window frames. Use it to clamp various lighting, background, or grip equipment to it with full confidence.

    Three Sizes:

    (30 - 53") (4.4-8.2’) (8-15’)

  • Day rate: $15

    Week rate: $45

Clamps

Cardellini End Jaw (2 inch)

  • Cardellini End Jaw provides strong, solid gripping of round, square, or rectangular tubing. At one end of the steel shaft are the fixed end jaws and at the other a 5/8" (Baby/750) pin for mounting fixtures or other grip/camera items.

  • Day Rate: $6

    Week Rate: $18

Double Spud Cardellini (6 inch)

  • A Double Spud Cardellini provides strong, solid gripping of round, square, or rectangular tubing and many other common or irregular shapes. At one end of the steel shaft are the fixed end jaws, and at the other a 5/8" baby pin for mounting up to two fixtures.

  • Day rate: $6

    Week rate: $18

Super Mafer Clamp w/ 750 Pin

  • A Super Mafer Clamp with 5/8" (750/Baby) Pin is strong enough to withstand greater clamping pressure than any other clamp of its kind. You can use this on pipes and put a fixture on the 750 pin. There is also a 1/4” screw receiver to mount magic arms.

  • Day rate: $6

    Week rate: $18

Duckbill Clamp

  • A Duckbill Clamp or commonly known as a Quacker/Platypus Clamp is an ideal solution for positioning foam core, reflector, or bead board. It uses a locking mechanism and can lock anything just below 3 inches.

  • Day rate: $4

    Week rate: $12

Goal Post Clamp

  • A Goal Post Clamp is commonly known as The Big Ben Clamp is a clamp with a 1-1/8" (2K/Junior) pin attached. It can be used with a pipe having a diameter of 1-1/4 to 1-1/2" as a temporary overhead grid.

  • Day rate: $15

    Week rate: $45

Scissors Clamp

  • A Scissor Clamp, also known as a Drop Ceiling Scissor Clamp attaches to the dropped ceiling tile support rails found in many offices, allows the mounting of small lighting instruments on the pin without the need of a stand.

  • Day rate: $1

    Week rate: $3

Chain Vice Grip w/ 5/8" Pins

  • The Chain Grip provides maximum gripping power on any size pipe up to 6" in diameter. The Locking Pliers also provides maximum gripping power on both flat and round surfaces with smaller diameters.

  • Day Rate: $5

    Week Rate: $15

C- Clamps w/ 750 Spigot

  • 6" Jaw C-Clamp - with two 5/8" Pins. Steel channel welded to both sides of the opening for better and safer locking. Made for mounting Baby fixtures.

  • Day rate: $4

    Week rate: $12

C- Clamps w/ 2K Receiver

  • 10" Jaw C-Clamp - Double Junior Receiver. Steel channel welded to both sides of the opening for better and safer locking. Made for mounting Baby fixtures.

  • Day rate: $4

    Week rate: $12

Pony Clamp #1

  • Pony clamp is a light-duty general purpose clamp perfect for home, workshop or on the job application. #1 means that it has a clamping capacity of 1 inch.

  • Day rate: $0.50

    Week rate: $1.50

Pony Clamp #2

  • Pony clamp is a light-duty general purpose clamp perfect for home, workshop or on the job application. #2 means that it has a clamping capacity of 2 inches.

  • Day rate: $1

    Week rate: $3

Pony Clamp #3

  • Pony clamp is a light-duty general purpose clamp perfect for home, workshop or on the job application. #3 means that it has a clamping capacity of 3 inches.

  • Day rate: $2

    Week rate: $6

Plates

Junior (2K) Wall Plate

  • Functions very much the same way as a Baby Plate, but its made with a heavier plate and a 1-1/8" Posi-V-Lock receiver for larger lights.

  • Day Rate: $3

    Week Rate: $9

3” Baby (750) Base Plate

  • This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 3 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount.

  • Day rate: $2

    Week rate: $6

6” Baby (750) Base Plate

  • This is a 3 x 5 metal plate with a welded 5/8 inch stud that extends 6 inches. The plate has 8 anchor points for nails or screws, which are not included. This item may be used on a wall, or free-standing as a floor-level light mount.

  • Day rate: $2

    Week rate: $6

750 to 2K Adapter

  • Used to convert a Junior 1-1/8 inch female receptor to a Baby, or standard 5/8 inch male stud.

  • Day rate: $2

    Week rate: $6

Pipe & Rigging Hardware

2K Pipe Clamp

  • A 2K Pipe Clamp has a 2K (Junior) Pin to mount any fixtures that takes 2K. It uses a bolt to tighten the fixture onto a pipe. It has a safety chain and cotter pin attached.

  • Day rate: $3

    Week rate: $9

750 Pipe Clamp

  • A 750 Pipe Clamp has a 750 (Baby) Pin to mount any fixtures that takes 750. It uses a bolt to tighten the fixture onto a pipe. It has a safety chain and cotter pin attached.

  • Day rate: $3

    Week rate: $9

Hard 90 Clamp

  • Used for mounting a light, or other grip equipment, at a right (90°) angle to a grip pipe, or truss. Ends in a 5/8 inch pin.

  • Day rate: $3

    Week rate: $9

Swivel Grid Clamp

  • Grips 1-1/4 to 1-1/2 inch pipe diameter and is capable of moving freely due to its swivel feature.

  • Day rate: $3

    Week rate: $9

Pipe Joiner

  • A Pipe Joiner connects two 1-1/4” Pipes. This can be used to create a frame with corners to create a frame for diffusion fabrics.

  • Day rate: $5

    Week rate: $15

Safety Chain 30”

  • A Safety Chain is a metal chain used to secure lighting fixtures or camera rigs. If a fixture or rig fails, this chain is a back up so that the equipment doesn’t fall to the ground.

  • Day rate: $1

    Week rate: $3